Garmin GPSMAP 295 Manuel d'utilisateur télécharger pdf (Page 93)

Airspace alarms are designed to provide message alerts in several stages, depending on whether you

are projected to enter an airspace or are just in close proximity. The GPSMAP 295 provides the

following airspace alerts:

• Ahead—your projected course will take you inside an airspace within the next ten minutes or less.

• Near—y

ou are within two nautical miles of an airspace, but not projected to enter it.

• Near & Ahead—

you are within two nautical miles of an airspace and your current course will

take you inside the airspace

• Inside Airspace—

you are within the boundaries of the airspace

Some airspace altitude limits may be charted in terms of altitude above ground level

(AGL). If the actual lower limit of an airspace is charted in AGL, the GPSMAP 295 will

alert you at any altitude below the upper limit. However, if the actual upper limit is also

charted in AGL, the GPSMAP 295 will provide the alert at all altitudes.

Alarms for most categories by be turned off, except for Prohibited Areas. Disabling an

airspace alert will prevent the alert message, but the airspace boundary will still appear

on the map.

If you fly above or below an airspace, then descend or climb to enter the airspace, the

‘Inside Airspace’ message may be the only alert provided! The ‘Airspace Ahead’ and/or

‘Airspace Near’ messages will not occur if you are outside the vertical limits defined by

the airspace plus the altitude buffer setting.

Main Menu: Airspace

‘Inside Airspace’ occurs when you are within the boundaries

of an airspace.

Select the ‘AIRSPACE’ tab to view airspace alert settings.

You may enable/disable the airspace alerts by the individual

categories.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 115 116

Pas de commentaire

Garmin GPSMAP 295 Manuel d'utilisateur Page 93