Garmin GPSMAP 180 Manuel d'utilisateur télécharger pdf (Page 18)

To mark your present position:

1. Press the

key. The mark position page will appear, with a default three-digit way-

point name and symbol.

2. Use the

keypad to highlight the waypoint name field (001) and press

3. Press the LEFT ARROW of the

keypad to clear the name field.

4. Use the

keypad to enter the name DOCK, using the UP and DOWN arrows to select

each letter, and the RIGHT arrow key to advance to the next character position. If you

make a mistake and select an incorrect character, simply use the LEFT arrow key of the

keypad to backspace the cursor and correct the entry.

5. Press

to confirm the name.

6. The field highlight will advance to the symbol field. Press

to access the waypoint

symbol page.

7. Use the

keypad to highlight the ANCHOR symbol.

8. Press

to confirm the symbol.

9. Press

again to confirm the DONE? prompt and save the waypoint.

The waypoint is now stored in memory. Note that waypoints may also be creat-

ed directly from the map display or by manually entering position coordinates.

Both of these techniques are described in the reference section of the manual

and/or on your GPSMAP 180 quick reference guide. To continue our tour, lets

move on to the Map Page.

1. Press the

key.

GETTING STARTED

Marking A Position

A. The mark position page will automatically

assign a default three-digit name for each

waypoint, which can be changed at any time

to an alphanumeric name containing up to

six-characters.

B. A complete set of waypoint symbols allows

you to mark inland and offshore waypoints

with a custom icon for fast waypoint recogni-

tion.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Pas de commentaire

Garmin GPSMAP 180 Manuel d'utilisateur Page 18