Garmin Ghc 10 Manuel d'utilisateur télécharger pdf (Page 16)

14 GHC 10 Quick Start Manual

Conguring the GHC 10

User Settings

Though the autopilot is congured for

your boat during installation, you may

nd it necessary to adjust it slightly

depending on sea conditions. You may

also disable the Shadow Drive if you

prefer.

To access the user autopilot

conguration, select Menu > Setup >

User Autopilot Conguration.

Shadow Drive

™

—disable or re-enable

the Shadow Drive.

CAUTION: On a GHP 10 autopilot

system, if you disable the Shadow

Drive, you will need to place the

autopilot on standby (STBY) to

manually control the helm. Use

caution when disabling the Shadow

Drive.

On a GHP 10V autopilot system, if you

disable the Shadow Drive, any

adjustment to the helm completely

disengages the autopilot.

Shadow Drive Sensitivity—on a

GHP 10 autopilot system, adjust this

setting if the Shadow Drive is being

tripped falsely or not activating properly.

If the autopilot disengages while the

helm is steady, decreasing this value

may help. If the Shadow Drive does not

disengage the autopilot correctly when

you take the helm, increasing this value

may help. This setting does not apply to

a GHP 10V autopilot system.

Sea State Filtering—adjust this setting

to slow the heading response down

and reduce rudder activity. Leave this

setting at 0% under normal operating

conditions, and increase it when

operating the autopilot in choppy seas

at low speeds. Increasing the Sea State

Filtering setting in choppy conditions

will save wear on your autopilot system.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire