Garmin Software Version 0636.02 Guide de l'utilisateur Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 106
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT
190-00664-01 Rev. A
14
GPS Navigation
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
7)
Turn the small FMS Knob to enter the desired altitude.
8)
Press the ENT Key. If the waypoint entered is an airport, the option to
select MSL or AGL is now displayed. If the waypoint is not an airport,
proceed to step 10.
9)
Turn the small FMS Knob to select ‘MSL’ or AGL’.
10)
Press the ENT Key. The cursor is placed in the ‘OFFSET’ offset distance field.
11)
Turn the small FMS Knob to enter the desired target altitude offset from
the selected Direct-to.
12)
Press the ENT Key to highlight Activate?’ or turn the large FMS Knob to
highlight the ‘CRS’ field.
13)
Turn the small FMS Knob to enter the desired course to the waypoint.
14)
Press the ENT Key to highlight ACTIVATE?’.
15)
Press the ENT again to activate the Direct-to.
ACTIVATE A STORED FLIGHT PLAN
1)
Press the FPL Key on the Control Unit and turn the small FMS Knob to display
the Flight Plan Catalog Page.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the desired flight plan
4)
Select the ACTIVE Softkey. The confirmation window is now displayed.
5)
With ‘OK’ highlighted, press the ENT Key to activate the flight plan. To cancel
the flight plan activation, turn the large FMS Knob to highlight ‘CANCELand
press the ENT Key.
ACTIVATE A FLIGHT PLAN LEG
1)
From the Active Flight Plan Page, press the FMS Knob to activate the cursor
and turn the large FMS Knob to highlight the desired waypoint.
2)
Select the ACT LEG Softkey.
OR
Press the MENU Key, select the Activate Leg’ option from the page menu
and press the ENT Key. This step must be used when activating a leg from
the PFD.
3)
With Activate’ highlighted, press the ENT Key.
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 105 106

Commentaires sur ces manuels

Pas de commentaire