Garmin SR02232LA Manuel d'instructions Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 15
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
400W Series Rotorcraft 190-00356-21 Rev. C
Instructions for Continued Airworthiness Page 4 of 15
1. INTRODUCTION
1.1 PURPOSE
This document is designed for use by the installing agency of the Garmin Model 400W series
GPS/WAAS Nav/Com as Instructions for Continued Airworthiness in response to Federal Aviation
regulation (FAR) Part 27.1529, Part 27 Appendix A. The ICA includes information required by the
operator to adequately maintain the Garmin Models 400W series installed under Rotorcraft Approved
Model List (AML) STC SR02232LA.
1.2 Scope
This document identifies the Instruction for Continued Airworthiness for the modification of the rotorcraft
for installation of the Garmin Models 400W series GPS/WAAS Nav/Com installed under Rotorcraft
Approved Model List (AML) STC SR02232LA.
1.3 Document Control
This document shall be released, archived, and controlled in accordance with the Garmin document
control system. When this document is revised, refer to Section 2.16 for information on how to gain FAA
acceptance or approval and how to notify customers of changes.
1.4 Permission to Use Certain Documents
Permission is granted to any corporation or person applying for approval of a Garmin Model 400W series
to use and reference appropriate STC documents to accomplish the Instructions for Continued
Airworthiness and show compliance with STC engineering data. This permission does not construe
suitability of the documents. It is the responsibility of the applicant to determine the suitability of the
documents for the ICA.
1.5 Definitions
The following terminology is used within this document:
1) AC: Advisory Circular
2) ACO: Aircraft Certification Office
3) AEG: Aircraft Evaluation Group
4) CFR: Code of Federal Regulations
5) DER: Designated Engineering Representative
6) FAA: Federal Aviation Administration
7) IAW: In Accordance With
8) ICA: Instructions for Continued Airworthiness
9) MFD: Multi-Function Display unit
10) PMI: Primary Manufacturing Inspector
11) POI: Primary Operations Inspector
12) STC: Supplemental Type Certificate
13) TC: Type Certification or Type Certificate
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 14 15

Commentaires sur ces manuels

Pas de commentaire