Garmin Software Version 0534.15 Guide de l'utilisateur Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 122
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
Garmin G1000 Cockpit Reference Guide for the Cessna Corvalis/Corvalis TT
190-00567-04 Rev. A 13
Nav/Com/XPDR/Audio Panel
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
NAV/COM/TRANSPONDER/AUDIO PANEL
ADF TUNING (OPTIONAL)
1)
Select the ADF/DME Softkey.
2)
Turn the small FMS Knob to enter the first digit of the desired ADF
frequency.
3)
Turn the large FMS Knob to select the next desired field.
4)
Turn the small FMS Knob to enter the desired number.
5)
Repeat steps 3 and 4 until the desired ADF frequency is entered.
6)
Press the ENT Key to accept the new frequency.
7)
Press the ENT Key again to transfer the frequency to the active field.
8)
Turn the large FMS Knob to select the MODE field.
9)
Turn the small FMS Knob to select ANT, ADF, ADF/BFO, or ANT/BFO.
10)
Press the ENT Key to complete the selection.
DME TUNING (OPTIONAL)
1)
Select the ADF/DME
or
DME Softkey.
2)
Turn the large FMS to select the DME source field.
3)
Turn the small FMS Knob to select the desired Nav radio.
4)
Press the ENT Key to complete the selection.
ENTER A TRANSPONDER CODE
1)
Select the XPDR Softkey to display the transponder mode selection
softkeys.
2)
Select the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
3)
Select the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 121 122

Commentaires sur ces manuels

Pas de commentaire