Garmin SA01535Wi_D Guide de l'utilisateur Page 82

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 174
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 81
Garmin G1000 Cockpit Reference Guide for the Beechcraft 200/B200 Series
190-00929-04 Rev. A
64
Hazard Avoidance
Flight
Instruments
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
FeaturesAnnun/AlertsAppendixIndex
Displaying Traffic on the Traffic Map Page
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Traffic Map Page.
3)
Select the TA ONLY or TA/RA Softkey to begin displaying traffic. ‘TA/RA’ or
‘TA ONLY’ respectively, is displayed in the TCAS Mode field.
4)
Select the STANDBY Softkey to place the system in the Standby Mode.
‘TFC STBY’ will be displayed in the TCAS Mode field.
5)
Select the ABS (absolute) or REL (relative) Softkey to display intruder
altitude as an absolute altitude or an altitude relative to own aircraft
altitude.
6)
Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
Changing the Altitude Range
1)
On the Traffic Page, select the
ALT RNG
Softkey.
2)
Select one of the following Softkeys:
AB
OVE: Displays non-threat and proximity traffic from 9900 feet above the
aircraft to 2700 feet below the aircraft. Typically used during climb phase
of flight.
NO
RMAL: Displays non-threat and proximity traffic from 2700 feet above
the aircraft to 2700 feet below the aircraft. Typically used during enroute
phase of flight.
BE
LOW: Displays non-threat and proximity traffic from 2700 feet above the
aircraft to 9900 feet below the aircraft. Typically used during descent phase
of flight.
UN
REST (unrestricted): All traffic is displayed.
3)
To return to the Traffic Page, select the BACK Softkey.
Displaying Traffic on the Navigation Map
1)
Ensure TCAS II system is operating. With the Navigation Map displayed,
select the MAP Softkey.
2)
Select the TRAFFIC Softkey. Traffic will now be displayed on the map.
Vue de la page 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 173 174

Commentaires sur ces manuels

Pas de commentaire