Garmin GPSMAP 3005C Manuel d'utilisateur télécharger pdf (Page 22)

14 GPSMAP 3005C Owner’s Manual

bAsIc oPerAtIon > creAtIng And usIng wAyPoInts

Creating Waypoints Manually

You can manually enter position coordinates to create a waypoint using the Points

tab on the Main Menu. This method is useful for creating a waypoint at a specic

latitude/longitude position from a chart or other source.

CAUTION: When entering a waypoint manually, be sure that the unit is set

to the same position format and map datum as the paper chart or coordinates

source. Entering coordinates into the GPSMAP 3005C while it is set to a datum

different from the datum in which the coordinates were created can result in an

incorrect waypoint location.

To create a new waypoint by entering position coordinates:

1. Press and hold ADJ/MENU to open the Main Menu.

2. Highlight the Points tab. You can also mark your present location using

the steps on page 13, and then proceed to step 4.

3. Press the New Waypoint soft key. The Review Waypoint Page appears

with the next available waypoint number and the receiver’s last known

location as the default name and location.

4. Use the ROCKER to highlight the Position eld, and press ENTER.

5. Enter position coordinates using the ROCKER, and press ENTER.

6. To accept the waypoint with the default information, press the OK soft key

To change any waypoint information, highlight the appropriate eld and

press ENTER. After entering your changes, press the OK soft key. For

information on editing waypoints, see page 15.

You can

enter location

coordinates

manually.

Review Waypoint Page

Two other options are available on the Review Waypoint Page:

•

Add to Route—adds the new waypoint to the end of a route.

•

Move Wpt (waypoint)—moves or projects the waypoint to a new location

on the map display.

To add a new waypoint to a route:

1. Press the Add To Route soft key. The Select Route Page appears.

2. Highlight a route or New Route, and press ENTER.

3. Highlight OK, and press ENTER to add the waypoint to the route.

basIc

operatIon

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

Pas de commentaire

Garmin GPSMAP 3005C Manuel d'utilisateur Page 22