Garmin GPSMAP 3005C Manuel d'utilisateur télécharger pdf (Page 24)

16 GPSMAP 3005C Owner’s Manual

bAsIc oPerAtIon > revIewIng And edItIng wAyPoInts

To access the map window on the Review Waypoint Page:

1. Press FCTN to highlight the map window. You can pan the map, change

the map range, or use the map pointer to select a location.

Review Waypoint Page

Map window

2. Press FCTN to return to the left side of the Review Waypoint Page.

Moving a Waypoint

You can modify a waypoint by moving or “projecting” the distance and bearing

from its present location to a new location.

To move the waypoint on the map:

1. Press the Move Wpt soft key. The map window on the right side of the

page is highlighted with the selected waypoint centered and highlighted on

a map display. The word MOVE appears below the pointer.

2. Use the

ROCKER to move the waypoint to the new location. The distance

and bearing from the waypoint’s current location appears in the upper-left

corner of the map window.

3. Press ENTER to accept the new waypoint location.

4. Press FCTN to return to the left side of the Review Waypoint Page.

Using Waypoint Lists

The Points tab on the Main Menu has two sub tabs, User and Proximity, which

allow you to manage a large number of waypoints quickly and efciently. The

Proximity sub tab also provides a continuously updated proximity waypoint alarm

that can be used to dene an alarm circle around submerged hazards or shallow

waters.

basIc

operatIon

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 123 124

Pas de commentaire

Garmin GPSMAP 3005C Manuel d'utilisateur Page 24