Garmin GPSMAP 188C Sounder Manuel d'utilisateur télécharger pdf (Page 31)

GPSMAP 188/188C Sounder Owner’s Manual 25

BASIC OPERATION > DSC

Navigating to a Position Report or Distress Call

After a Position Report or a Distress Call is received, navigation

can be quickly set to the call location.

To navigate to Position Report or Distress Call:

1 Press NAV.

2. With Go To MMSI/Name highlighted, press ENTER.

1. Highlight the call on the Call List or Log, and press NAV.

2. With Go To MMSI/Name or DSC highlighted, press ENTER.

Navigating to a DSC Call

Setting up DSC

The DSC Setup sub tab turns DSC chartplotter information display

On and Off. This Setup tab also allows you to simulate Distress

Calls and Position Reports while the unit is in Simulator Mode

(see page 3). Simulating calls is helpful for practice before

connecting to the real system. The Distress Call simulator also

helps to check if alarms are working properly.

DSC Setup

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 125 126

Pas de commentaire

Garmin GPSMAP 188C Sounder Manuel d'utilisateur Page 31