
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
190-00600-01 Rev. C
Appendix
89
After the data has been copied to the appropriate data cards, perform the following
steps:
1)
Insert one SD card in the bottom card slot of the MFD and one in the
bottom card slot of each PFD. The SD card containing the ChartView or
FliteCharts database must be inserted into the bottom slot on the MFD.
2)
Apply power to the G1000 System. View the MFD power-up splash screen.
Check that the databases are initialized and displayed on the scrolling
window of the splash screen. When updating the terrain and FliteCharts
databases, an ‘in progress’ message may be seen. If this message is
present, wait for the system to finish loading before verifying the correct
databases are initialized, then proceed to step 3.
Power-Up Splash Screen Window
3)
Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right most softkey.
4)
Turn the large FMS Knob to select the AUX Page group on the MFD.
5)
Turn the small FMS Knob to select the System Status Page.
6)
Press the DBASE Softkey to place the cursor in the ‘DATABASE’ box.
7)
Turn either FMS Knob to scroll through the database list and check that all
databases are current and there are no errors.
8)
Power down the G1000.
Commentaires sur ces manuels