Garmin Software Version 0435.09 Guide de l'utilisateur Page 42

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 110
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 41
190-00600-01 Rev. C
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
28
Procedures
4)
Turn the large FMS Knob to highlight the desired arrival.
5)
Press the ENT Key. A list of transitions is displayed for the selected arrival.
6)
Turn either FMS Knob to select the desired transition.
7)
Press the ENT Key. A list of runways is displayed for the selected arrival.
8)
Turn the large FMS Knob to highlight the desired runway.
9)
Press the ENT Key.
10)
With ‘LOAD?’ highlighted, press the ENT Key.
11)
The arrival will become part of the active flight plan.
ACTIVATE AN ARRIVAL LEG
1)
Press the FPL Key to display the active flight plan.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the desired waypoint within the
arrival.
4)
Select the ACT LEG Softkey. A confirmation window showing the selected
leg will be displayed.
5)
With ACTIVATE’ highlighted, press the ENT Key.
LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE
NOTE: If certain GPS parameters (WAAS, RAIM, etc.) are not available, some
published approach procedures for the desired airport may not be displayed
in the list of available approaches.
1)
Press the PROC Key.
2)
Turn the large FMS Knob to highlight ‘SELECT APPROACH’.
3)
Press the ENT Key. A list of available approaches for the destination airport
is displayed.
4)
Turn the either FMS Knob to highlight the desired approach.
The WAAS channel and ID for the selected approach procedure are
displayed in the APPROACH CHANNEL’ field.
5)
Press the ENT Key. A list of available transitions for the selected approach
procedure is now displayed.
Vue de la page 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 109 110

Commentaires sur ces manuels

Pas de commentaire