Garmin Software Version 0719.12 Guide de l'utilisateur Page 78

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 178
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 77
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850/900
190-00708-05 Rev. C
60
Hazard Avoidance
Flight
InstrumentsEAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
5)
Turn the large FMS Knob highlight to the ‘DIAMETER / RTE WIDTH’
distance field and turn the small FMS Knob to select the desired diameter
and route width of the request, then press the
ENT
Key.
6)
Turn the large FMS Knob until the ‘SEND REQ’ button is highlighted. Press
the
ENT
Key to initiate the request immediately or press the FMS Knob to
return to the Connext Data Link Page without requesting data.
During a Connext Data Request, the Request Status box initially displays “Contacting
Connext...”. Once a connection is established, the Request Status Box displays “Receiving
Wx Data... Time Remaining:” with an estimated data transfer time (either minutes or
seconds). If desired, the Connext Data Request window may be closed while the data
request is processing by pressing the FMS Knob; the data request will continue to process
in the background. Connext Data Requests typically take between 1 to 4 minutes to
complete depending on the size of the selected weather coverage area and Iridium signal
strength.
The system retrieves all available Worldwide Weather products within the selected
coverage area during an initial Connext Data Request, regardless of which products (if
any) are currently enabled for display. On subsequent requests, previously retrieved
textual data (such as METARs and TAFS) is retained if it has not expired, while new
textual weather data matching the current coverage area and all graphical weather data is
downloaded during every data request.
If the system cannot complete a Connext weather data request, one or more mes-
sages will appear in the request status window as indicated in the following table.
Weather Request
Status Message
Description
Auto requests inhibited
Send manual request to
reset.
The system has disabled automatic weather data requests due to
excessive errors. Automatic weather data requests have stopped. Send
a manual weather data request to resume automatic updates.
Auto update retry: ##
Seconds
The system will attempt another automatic weather data request after
an error occurred during the previous request. Timer counts down until
the next automatic request occurs.
Connext Comm Error [2] A communications error has occurred with the GDL59 or GIA. The
G1000 should be serviced.
Connext Comm Error [4] This occurs if multiple automatic weather data requests have recently
failed, or the GDL 59 or a GIA is off-line.
Vue de la page 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 177 178

Commentaires sur ces manuels

Pas de commentaire