Garmin Software Version 0767.15 Guide de l'utilisateur Page 111

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 138
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 110
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-05 Rev. A 93
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
NON WGS84 WPT
– Do not use GPS
for navigation to [xxxx]
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in
error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint.
TRAFFIC FAIL
Traffic device has
failed.
The system is no longer receiving data from
the traffic system. The traffic device should be
serviced.
FAILED PATH
A data path has
failed.
A data path connected to the GDU, GDL 69A,
or the GIA 63/W has failed.
STRMSCP FAIL
– Stormscope has
failed.
Stormscope has failed. The G1000 system
should be serviced.
MAG VAR WARN
– Large magnetic
variance. Verify all course angles.
The GDU’s internal model cannot determine
the exact magnetic variance for geographic
locations near the magnetic poles. Displayed
magnetic course angles may differ from the
actual magnetic heading by more than 2°.
SVS
– SVS DISABLED: Out of
available terrain region.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
SVS
– SVS DISABLED: Terrain DB
resolution too low.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
SCHEDULER [#]
– <message>. Message criteria entered by the user.
[PFD1, PFD2, or MFD1]
CARD
1 REM
– Card 1 was removed.
Reinsert card.
The SD card was removed from the top card
slot of the specified PFD or MFD. The SD card
needs to be reinserted.
[PFD1, PFD2, or MFD1]
CARD
2 REM
– Card 2 was removed.
Reinsert card.
The SD card was removed from the bottom
card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
Vue de la page 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 137 138

Commentaires sur ces manuels

Pas de commentaire