Garmin Software Version 0767.15 Guide de l'utilisateur Page 128

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 138
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 127
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-05 Rev. A
Appendix
110
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Loading the Jeppesen Navigation Database as the Standby Navigation
Database
ThepurposeoftheStandbyNavigationDatabaseistoallowtheloadingofthe
nextcycleoftheJeppesenNavigationDatabasetothebottomSDcard,priortoits
effectivedate.(TheJeppesenNavigationDatabaseisavailablefromJeppesenseven
dayspriortoitseffectivedate.)
NOTE: After the navigation database is loaded or copied, the top SD card
may be removed.
1)
With the system OFF, insert the SD card containing the new navigation
database version into the top card slot of the MFD.
2)
Verify that an SD card is inserted in the bottom slot of each PFD and the
MFD.
3)
Turn the system ON. A prompt is displayed.
4)
Press the YES Softkey. The navigation database is copied to the SD card in
the bottom card slot of the MFD.
5)
After the navigation database files are copied to the bottom SD card, press
any key to verify, as instructed.
6)
After database verification is complete, press any key to continue as
instructed on the display.
7)
Press the NO Softkey. The display now starts in normal mode. Since the
database effective date is not yet valid, it should not be loaded as the
active database. The display now starts in normal mode. Do not remove
power while the display is starting.
8)
Press the ENT Key to acknowledge the startup screen.
9)
Turn the large FMS Knob to select the AUX Page group on the MFD.
Vue de la page 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 137 138

Commentaires sur ces manuels

Pas de commentaire