Garmin Pilatus PC_6 Guide de l'utilisateur Page 369

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 404
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 368
190-00870-00 Rev. B
Garmin G950 Pilot’s Guide for the Pilatus PC-6
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
357
APPENDIX A
GDC 74A MESSAGE ADVISORIES
Message Comments
ADC1 ALT EC
ADC1 altitude error
correction is unavailable.
GDC1 is reporting that the altitude error correction is unavailable.
ADC1 AS EC
ADC1 airspeed error
correction is unavailable.
GDC1 is reporting that the airspeed error correction is unavailable.
MANIFEST
– GDC1 software
mismatch, communication halted.
The GDC 74A has incorrect software installed. The G950 system should be serviced.
GWX 68 MESSAGE ADVISORIES (OPTIONAL)
Message Comments
GWX CONFIG
– GWX config error.
Config service req’d.
GWX 68 configuration settings do not match those of the GDU configuration. The
G950 system should be serviced.
GWX FAIL
– GWX is inoperative. The GDU is not recieving status packet from the GWX 68 or the GWX 68 is reporting
a fault. The GWX 68 radar system should be serviced.
GWX SERVICE
– Needs service.
Return unit for repair.
A failure has been detected in the GWX 68. The GWX 68 may still be usable.
WX ALERT
– Possible severe weather
ahead.
The GWX 68 indicates severe weather within ±10 degrees of the aircraft heading at a
range of 80 to 320 nm.
MANIFEST
– GWX software
mismatch, communication halted.
The GWX 68 has incorrect software installed. The G950 system should be serviced.
MISCELLANEOUS MESSAGE ADVISORIES
Message Comments
FPL WPT LOCK
– Flight plan waypoint
is locked.
Upon power-up, the G950 system detects that a stored flight plan waypoint is locked.
This occurs when an aviation database update eliminates an obsolete waypoint. The
flight plan cannot find the specified waypoint and flags this message. This can also
occur with user waypoints in a flight plan that is deleted.
Remove the waypoint from the flight plan if it no longer exists in any database,
Or - update the waypoint name/identifier to reflect the new information.
FPL WPT MOVE
– Flight plan
waypoint moved.
The system has detected that a waypoint coordinate has changed due to a new
aviation database update. Verify that stored flight plans contain correct waypoint
locations.
TIMER EXPIRD
Timer has expired. The system notifies the pilot that the timer has expired.
DB CHANGE
– Database changed.
Verify user modified procedures.
This occurs when a stored flight plan contains an airway that is no longer consistent
with the aviation database. This alert is issued only after an aviation database
update. Verify that the user-modified procedures in stored flight plans are correct and
up to date.
DB CHANGE
– Database changed.
Verify stored airways.
This occurs when a stored flight plan contains an airway that is no longer consistent
with the aviation database. This alert is issued only after an aviation database
update. Verify use of airways in stored flight plans and reload airways as needed.
FPL TRUNC
– Flight plan has been
truncated.
This occurs when a newly installed aviation database eliminates an obsolete approach
or arrival used by a stored flight plan. The obsolete procedure is removed from the
flight plan. Update flight plan with current arrival or approach.
Vue de la page 368
1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 403 404

Commentaires sur ces manuels

Pas de commentaire