Garmin POWERLITE CINEMA 200+ Manuel d'utilisateur télécharger pdf (Page 18)

Turning Off the Projector

To turn off the projector, press the Off button on the remote control or press the Power

button on the projector twice.

Let the projector cool while the Ppower light flashes red (about 30 seconds). Once the light

stops flashing and stays on, it’s safe to unplug the projector.

Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce its

overall life. Never unplug the projector without pressing the Off or Power button and letting it cool,

or you could damage the projector and reduce lamp life.

Selecting the Image Source

The Source buttons let you switch between images output from different pieces of equipment

connected to the projector (such as a DVD player, cable or satellite box, or video game

console).

If you don’t see the image you want, press the

Source button that corresponds to the port to

which your video source is connected.

For example:

Note: If you’re projecting in a darkened room, press the button (located near the bottom of the

remote control). This lights up all the keys.

To temporarily turn off the image and darken the screen (without turning off the projector), press

the Blank button. Press the Blank button again to return to normal viewing.

To select the image source connected to

the Video port . . .

. . . press the Video button

PowerLite Cinema 200+.book Page 18 Thursday, August 18, 2005 2:37 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

Pas de commentaire

Garmin POWERLITE CINEMA 200+ Manuel d'utilisateur Page 18