Garmin Software Version 0764.09 Guide de l'utilisateur Page 53

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 142
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 52
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-06 Rev. A 37
Flight Planning
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
6)
Press the IMPORT Softkey.
If an empty flight plan is selected, a list of the available flight plans on
the SD card will be displayed.
Or:
If an existing flight plan is selected, an ‘Overwrite existing flight plan?
OK or CANCEL’ prompt is displayed. Press the ENT Key to choose to
overwrite the selected flight plan and see a list of the available flight
plans on the SD card. If overwriting the existing flight plan is not
desired, select ‘CANCEL’ using the FMS Knob, press the ENT Key, select
another existing or empty flight plan, and again press the IMPORT
Softkey.
7)
Turn the small FMS Knob to highlight the desired flight plan for importing.
8)
Press the ENT Key.
INSERT A WAYPOINT IN THE ACTIVE FLIGHT PLAN
Insert waypoint using the Quick Select Box:
1)
Press the FPL Key on the Control Unit to display the active flight plan.
2)
Use the Joystick to move the Quick Select Box to the waypoint before
which the new waypoint will be inserted. The Insertion Point Indicator
(small light blue triangle) further illustrates the waypoint insertion point.
3)
Begin entering the identifier of the new waypoint using the controller
alphanumeric keys. The Waypoint Information Window is displayed as the
identifier is entered.
4)
Press the ENT Key.
Insert waypoint using the cursor:
1)
Press the FPL Key on the Control Unit to display the active flight plan.
2)
If necessary, press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to move cursor and Insertion Point Indicator
(small light blue triangle) to the desired insertion point in the flight plan.
The new waypoint is inserted before the highlighted waypoint.
4)
Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
Vue de la page 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 141 142

Commentaires sur ces manuels

Pas de commentaire