Garmin Software Version 0369.13 Guide de l'utilisateur Page 120

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 184
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 119
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
SECTION 7 – NAVIGATION
7-28
3)
Press the
FMS
Knob to remove the flashing
cursor.
7.13 NEAREST USER WAYPOINT
Figure 7-65 Nearest User Waypoints Page
Select the Nearest User Waypoint Page
1)
Turn the large
FMS
Knob to select the ‘NRST’ page
group.
2)
Turn the small
FMS
Knob to select the fifth
rectangular page icon.
Select a Nearest User Waypoint
1)
With the Nearest User Waypoint Page displayed,
press the
FMS
Knob to activate the cursor. If any
previously entered User Waypoints are within 200
nm, these will be displayed with the closest listed
first.
2)
Turn either
FMS
Knob to select the desired waypoint.
The remaining information on the Nearest User
Waypoint Page pertains to the selected Nearest
User Waypoint.
3)
Press the
FMS
Knob to remove the flashing
cursor.
7.14 NEAREST FREQUENCIES
Figure 7-66 Nearest Frequencies Page
Select the Nearest Frequencies Page
1)
Turn the large
FMS
Knob to select the ‘NRST’ page
group.
2)
Turn the small
FMS
Knob to select the sixth
rectangular page icon.
Select and Load the Nearest ARTCC, FSS, or
Weather Frequency
1)
With the Nearest Frequencies Page displayed, press
the
ARTCC, FSS,
or
WX
Softkey to place the cursor
in the appropriate field.
2)
Turn the
FMS
Knobs to select the desired facility or
frequency.
3)
Press the
ENT
Key to load the frequency into the
COM frequency standby field.
4)
Press the
FMS
Knob to remove the flashing
cursor.
Vue de la page 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 183 184

Commentaires sur ces manuels

Pas de commentaire