Garmin Software Version 0369.13 Guide de l'utilisateur Page 144

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 184
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 143
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
10-8
SECTION 10 – HAZARD
AVOIDANCE
10.5 AVIDYNE
®
TAS600 SERIES
Refer to the Avidyne
®
TAS600 Series Pilot’s Guide for a
detailed discussion of the TAS system and an explanation
of the aural alerts.
Displaying Traffic on the Traffic Map Page
1)
Turn the large
FMS
Knob to select the Map Page
Group.
2)
Turn the small
FMS
Knob to select the Traffic Map
Page. ‘OPERATING’ is displayed in the Traffic Mode
field.
3)
Press the
ALT MODE
Softkey to change the altitude
volume. Select the desired altitude volume by
pressing the
BELOW
,
NORMAL
,
ABOVE
, or
UNREST
(unrestricted) Softkey. The selection is displayed in
the Altitude Mode field.
4)
Rotate the
Joystick
clockwise to display a larger
area or rotate counter-clockwise to display a smaller
area.
5)
Press the MUTE Softkey to mute TAS voice alerts.
Traffic, Out of
Range
Proximity Traffic,
1000’ above &
descending
Traffic Mode
Figure 10-12 Traffic Map Page
“Non-Bearing” Traffic (system
is unable to determine bearing),
distance is 8.0 nm, 1190’ above
and descending
Traffic Advisory,
aircraft is 400’ below
& climbing
Altitude Mode
Displaying Traffic on the Navigation Map
1)
Ensure the TAS system is operating. With
the Navigation Map displayed, press the
MAP
Softkey.
2)
Press the
TRAFFIC
Softkey. Traffic will now be
displayed on the map (see Figure 10-12).
Vue de la page 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 183 184

Commentaires sur ces manuels

Pas de commentaire