Garmin Software Version 0369.13 Guide de l'utilisateur Page 135

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 184
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 134
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
9-3
SECTION 9 – PROCEDURES
Load and/or Activate an Approach Procedure
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight SELECT
APPROACH’.
3)
Press the
ENT
Key.
4)
If a ight plan is active, the destination airport
will be displayed as the default. A list of available
approaches is also displayed. If no flight plan is
active, use the
FMS
Knobs to enter the identifier of
the desired airport. Press the
ENT
Key.
5)
Turn the large
FMS
Knob to highlight the Approach
field. Turn the small
FMS
Knob to display a list of
available approaches.
Figure 9-6 Selecting an Approach Procedure
6)
Turn either
FMS
Knob to highlight the desired
approach. Press the
ENT
Key.
7)
The cursor will move to the TRANSITIONS eld.
Turn the large
FMS
Knob to highlight the desired
transition waypoint and press the
ENT
Key. (The
“Vectors” option assumes vectors will be received
to the final course segment of the approach and
will provide navigation guidance relative to the final
approach course.)
Figure 9-7 Selecting an Approach Transition
8)
Turn the large
FMS
Knob to highlight Activate?’
and press the
ENT
Key to activate the approach.
Selecting Load? will add the procedure to
the flight plan without immediately using it for
navigation guidance.
Activate An Approach in the Active Flight Plan
1)
With the Navigation Map Page displayed, press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight ACTIVATE
APPROACH’.
3)
Press the
ENT
Key. The approach procedure is now
active.
Vue de la page 134
1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 183 184

Commentaires sur ces manuels

Pas de commentaire