Garmin Software Version 0370.13 Guide de l'utilisateur Page 38

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 94
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 37
Garmin G1000 Cockpit Reference Guide for the DA42
5-2
SECTION 5 – AUDIO PANEL
5.1 COM RADIO SELECTION
Pressing the COM1 MIC or COM2 MIC key selects
the active transmitter (i.e., microphone). The associated
receiver audio (COM1 or COM2) also becomes selected
when the COM MIC key is pressed.
To prevent deselecting the desired received audio
when pressing another COM MIC key, press the already
selected COM1 or COM2 key before pressing the other
COM MIC key.
Figure 5-2 Transceivers
5.2 MARKER BEACON RECEIVER
The marker beacon receiver is always ON. Figure 5-3
shows the marker beacon annunciators on the PFD
Figure 5-3 Marker Beacon Signal Indicator Lights on the PFD
Inner Marker
Annunciator
Outer Marker
Annunciator
Middle Marker
Annunciator
When the MKR/MUTE key is pressed, the key an-
nunciator is lit and the audio tone can be heard over the
speaker or headsets during marker reception.
When the tone is active, pressing the
MKR/MUTE key
mutes the audio but does not affect the annunciator. The
audio returns when the next marker signal is received.
Marker Beacon Signal Sensitivity
The HI SENS key can be pressed for increased marker
beacon signal sensitivity.
Figure 5-4 Marker Beacon
5.3 NAVIGATION RADIO SELECTION
Pressing DME, ADF, NAV1, or NAV2 selects and
deselects the radio source and activates the annuncia-
tor. Selected audio can be heard over the headset and the
speakers. These four keys can be selected individually or
together.
Vue de la page 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 93 94

Commentaires sur ces manuels

Pas de commentaire