Garmin Software Version 0370.14 Guide de l'utilisateur télécharger pdf (Page 35)

100

Garmin G1000 Cockpit Reference Guide for the DA42

4-5

SECTION 4 – NAV/COM &

TRANSPONDER

4.7 TRANSPONDER

Mode Selection

The STBY, ON and ALT Softkeys can be accessed by

pressing the

XPDR Softkey.

Ground Mode (Automatic)

GND is displayed when the aircraft is on the ground.

Figure 4-11 Ground Mode

Reply Status

When the transponder sends replies to interrogations,

an “R” indication appears momentarily in the reply status

ﬁeld.

Figure 4-12 Reply Indication

Code Selection

1) Press the

XPDR

Softkey to display the

transponder Mode Selection softkeys.

2) Press the

CODE

Softkey to display the

transponder Code Selection softkeys, which

includes the digit softkeys.

3) Press the appropriate digit softkeys to enter

the code in the four-digit code ﬁeld of the

Transponder Status Box. Five seconds after the

fourth digit has been entered, the transponder

code becomes activated.

When entering a code, press the

BKSP

Softkey

as needed to back up and change code

digits.

Following is a list of important codes:

• 1200 – VFR code in the U.S. (please refer to the

ICAO standards for VFR codes in other countries).

• 7000 – VFR code commonly used in Europe

(please

refer to the ICAO standards).

• 7500 – Hijack code.

• 7600 – Loss of communication code.

• 7700 – Emergency code.

• 7777 – Military interceptor operations code

(NEVER ENTER THIS CODE).

• 0000 – Code for military use (in the U.S.).

Flight ID Reporting

If so conﬁgured, the Flight ID may be entered in

the Timer/Reference Window. If conﬁguration is set to

“SAME AS TAIL” the aircraft tail number will always be

displayed.

Figure 4-13 Timer/References Window

Flight ID

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Garmin Software Version 0370.14 Guide de l'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Navigateurs Garmin Software Version 0370.14