Garmin GPSMAP 496 Manuel d'utilisateur Page 133

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 196
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 132
Advanced NMEA Output Setup
If you are going to interface the GPSMAP 496 with another piece of
equipment (such as a radar or autopilot), the unit needs to be set to
output NMEA data. The NMEA data transmission can be customized
to keep the output rate at two seconds. If too many NMEA sentences
are selected the unit can take longer than two seconds to update. You
can also set the rate to Fast to output a minimum number of NMEA
sentences at 1-sceond intervals.
To access the Advanced NMEA Output Setup:
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to select Setup from the vertical tab list.
3. Select Interface from the row of tabs along the top.
4. Highlight the field below Serial Data Format. Press ENTER.
5. Select NMEA In/NMEA Out. Press ENTER.
6. Press MENU to open the options menu. Select Advanced
NMEA Setup, and press ENTER.
Advanced NMEA Output Setup
The Advanced NMEA Output Setup Page allows you to set the
output rate, change the precision of the Lat/Lon minutes, set
Waypoint IDs to names or numbers, as well as turn on and off the
GPS status, the GARMIN Proprietary sentences, and Waypoint/
Route (WPL, RTE).
GPSMAP 496 NMEA Sentence Output (NMEA version 3.01
compliant):
Always transmitted: GPRMC, GPGGA, GPGLL, GPBWC,
GPVTG, GPXTE, GPRMB
Switchable sentences: GPGSA, GPGSV, GPWPL, GPRTE
GARMIN proprietary: PGRME, PGRMZ, PGRMM, PGRMH
GPSMAP 496 Owners Manual 125
MAIN MENU > SETUP TAB
Vue de la page 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 195 196

Commentaires sur ces manuels

Pas de commentaire