Garmin GNS 430 Manuel d'utilisateur télécharger pdf (Page 136)

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

7-20

SECTION 7

WPT PAGES

2) Press the ENT Key to capture the position

and display the User Waypoint Page (Figure

7-44).

Figure 7-44 User Waypoint Page

3) A four-digit name is automatically assigned to

the waypoint. To change this name, turn the

large right knob to highlight the name ﬁeld,

then use the small and large right knobs to

select a new name. Press the ENT Key to

accept the selected name.

4) The cursor moves to the ‘Create?’ action ﬁeld.

Press the ENT Key to save the new waypoint.

Modifying User Waypoints

To modify an existing waypoint, select that waypoint

on the User Waypoint Page and enter the new position

information directly over the old information.

To modify a user waypoint by changing its

latitude/longitude position:

1) With the User Waypoint Page displayed, press

the small right knob to activate the cursor.

2) Use the small and large right knobs to enter

the name of the desired waypoint and press

the ENT Key.

3) Turn the large right knob to highlight the

position ﬁeld at the bottom of the page.

4) Use the small and large right knobs to enter

the new position coordinates (Figure 7-45)

and press the ENT Key to accept the selected

position.

Figure 7-45 Position Field Selected

5) The cursor moves to the ‘Modify?’ action ﬁeld.

Press the ENT Key to modify the waypoint.

6) Press the small right knob to remove the

ﬂashing cursor.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 265 266

Pas de commentaire

Garmin GNS 430 Manuel d'utilisateur Page 136