Garmin GNS 430 Manuel d'utilisateur télécharger pdf (Page 99)

GNS 430(A) Pilot’s Guide and Reference

190-00140-00 Rev. P

SECTION 6

PROCEDURES

6-17

10) After crossing the FAF, the destination

sequences to the MAP (‘RW22’, the runway

threshold). With the needle centered, fly

toward the MAP, observing the altitude

minimums dictated by the approach plate.

When viewing the Map Page, note that the ﬁnal

course segment is displayed in magenta (the

active leg of the ﬂight plan always appears in

magenta) and a dashed line extends the course

beyond the MAP (Figure 6-46).

Figure 6-46 Final Course Segment

11) When approaching the MAP, a waypoint alert

(‘APPRCHING WPT’) appears in the lower right

corner.

12) After crossing the MAP, ‘SUSP’ appears above

the OBS Key (Figure 6-47), indicating that

automatic sequencing of approach waypoints

is suspended at the MAP. A ‘from’ indication

is displayed on the CDI and Default NAV Page,

but course guidance along the ﬁnal approach

course continues. Do not follow this extended

course. Follow published missed approach

procedures using the OBS Key to initiate the

missed approach sequence, as outlined in

‘Flying the Missed Approach’ in this section.

Figure 6-47 ‘SUSP’ Annunciation

Vectors to Final

Take a second look at the ‘VOR 22’ approach into

Billard Municipal. Instead of following the DME arc, ATC

tells the pilot to expect vectors onto the nal approach

course. There are several ways to select ‘vectors to ﬁnal’

with the GNS 430. The ﬁrst two options below normally

require the least workload to accomplish:

• When the approach is rst selected, choose

‘VECTORS’ from the Transitions Window.

• Load a full approach (including the IAF from the

Transitions Window) as described in Section 6.1.

When cleared, press the PROC Key and select

‘Activate Vectors-To-Final?’.

• Load the full approach as described in Section

6.1. Use the Direct-to Key (by pressing it twice)

from the Active Flight Plan Page to select the

desired leg of the approach.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 265 266

Commentaires sur ces manuels

Pas de commentaire

Garmin GNS 430 Manuel d'utilisateur Page 99

Commentaires sur ces manuels

Produits connexes et manuels pour Récepteur GPS Garmin GNS 430