Garmin GNS 430 Manuel d'utilisateur Page 157

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 266
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 156
GNS 430(A) Pilot’s Guide and Reference
190-00140-00 Rev. P
9-3
SECTION 9
VLOC RECEIVER
4) Press the ENT Key to place the frequency in
the standby field of the VLOC Window (Figure
9-6).
Figure 9-6 Frequency in Standby Field
5) Press the VLOC Flip-flop Key to activate the
selected frequency.
6) Press the small right knob to remove the
flashing cursor.
NOTE: For duplex COM operations, the VLOC
receiver may be auto-tuned from the Nearest
Flight Service Station Page. See Section 8.8 for
more info.
When selecting a VOR or ILS approach, manual
tuning of the VLOC receiver is not required. Once the
approach procedure is ‘Loaded’ or ‘Activated’, the GNS
430 automatically places the proper frequency in the
standby field of the VLOC Window. To use this frequency,
press the VLOC Flip-flop Key to activate the frequency.
Additional information on approach procedures is
provided in Section 6.1.
To select an approach and automatically
tune the proper VLOC frequency:
1) Select the destination airport using the Direct-
to Key or as the last waypoint in the active
flight plan.
2) Press the PROC Key to display the Procedures
Page.
3) Turn the large right knob to highlight ‘Select
Approach?’ and press the ENT Key (Figure
9-7).
Figure 9-7 Procedures Page
4) A window appears listing the available
procedures. Turn the small right knob to
highlight the desired procedure and press the
ENT Key. (When a direct-to destination is
selected, departures are offered for the nearest
airport.)
5) A second window appears listing available
transitions. Turn the small right knob to
highlight the desired transition waypoint and
press the ENT Key. (The approach ‘Vectors’
option assumes the pilot will receive vectors to
the final course segment of the approach and
will provide navigation guidance to intercept
this final course.)
Vue de la page 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 265 266

Commentaires sur ces manuels

Pas de commentaire