Garmin Legacy Software Versions Guide de l'utilisateur Page 254

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 364
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 253
Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A
7-118
MULTI FUNCTION DISPLAY
The Display Units section of the System Setup Page
allows the following operations:
To select a Nav Angle (auto, true)
To select Distance and speed units (metric or
nautical)
To select Altitude and vertical speed units (feet,
meters)
To select Barometric pressure units (inches of
mercury, hectopascals)
To select Temperature units (Celsius, Fahrenheit)
To select Fuel and fuel flow units (gallons, impe-
rial gallons, kilograms, liters, pounds)
To select position
To change a Display Units setting:
1. Select the System Setup Page.
2. Press the
FMS
knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS
knob to highlight the
desired ‘DISPLAY UNITS’ field.
4. Turn the
small FMS
knob to display the options
list for the selected item.
5. Turn the
FMS
knob to highlight the new selec-
tion.
6. Press the
ENT
key.
Map Datums
The Map Datum section of the System Setup Page allows
selection of map datums to be used by the G1000 from a
list of datums available in the current aviation database
(See Appendix D for a list of available map datums).
NOTE: Per TSO C129a, the WGS-84 map datum should
be used in the United States. For use outside the U.S.,
select the geodetic datum required by that country.
To select a Map Datum:
1. Select the System Setup Page.
2. Press the
FMS
knob momentarily, to activate
the flashing cursor.
3. Turn the
large FMS
knob to highlight the
desired ‘MAP DATUM’ field.
4. Turn the
small FMS
knob to display the Map
Datum list.
5. Turn the
FMS
knob to highlight the new
datum.
6. Press the
ENT
key.
Vue de la page 253
1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 363 364

Commentaires sur ces manuels

Pas de commentaire