Garmin Legacy Software Versions Guide de l'utilisateur Page 98

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 364
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 97
Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A
3-18
NAV/COM
To auto-tune a NAV frequency if the desired
approach is already loaded:
1. Press the
PROC
key to open the Procedures
window.
2. Turn the large
FMS
knob to highlight the
ACTIVATE APPROACH’ menu option and
press the
ENT
key. The approach primary NAV
frequency becomes automatically loaded into
the standby field of the selected NAV radio.
When loading or activating an approach, the primary
NAV frequency may be loaded into the NAV tuning box by
highlighting the frequency in the Select Approach window
using the
FMS
knob, then pressing the
ENT
key.
If the system is in GPS mode when a VOR/ILS
approach is loaded or activated, the approach primary
NAV frequency is automatically loaded into the active
field of NAV1.
The NAV frequency is automatically loaded upon
vector-to-final activation. An approach can also be
activated with the
MENU
key when the Flight Plan
window is open.
Figure 4-30 Activating an Approach
NOTE: When a VOR/ILS approach has been
activated in GPS mode, and the ILS CDI Capture
option is set to AUTO, the system switches to
NAV mode as the final approach course is
intercepted (within 15 nm from the FAF). See
the Multi Function Display section for details.
Vue de la page 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 363 364

Commentaires sur ces manuels

Pas de commentaire