Garmin Legacy Software Versions Guide de l'utilisateur télécharger pdf (Page 34)

190-00498-00 Rev. AGarmin G1000 Pilot’s Guide for Cessna Nav III2-4

PRIMARY FLIGHT DISPLAY

2.2 BACKLIGHTING

NOTE: The backlighting can only be adjusted

from the PFD, except in reversionary mode.

NOTE: No other window can be displayed in the

lower right corner of the PFD when the

key is pressed to change the backlighting.

The backlighting of both the display and keys can be

adjusted for the PFD and MFD. The backlighting intensity

ranges from 0.14% to 100.00%. Two modes exist for

adjustment:

• Auto (default) – The G1000 adjusts backlighting

automatically with reference to the amount of

light in the cockpit

• Manual – Allows the pilot to manually adjust

backlighting

To manually adjust the backlighting for the

PFD and MFD:

Turn the avionics knob (for location refer to the

Aircraft Flight Manual).

1. Press the

key on the PFD to display

the PFD Setup Menu Window. ‘AUTO’ is now

highlighted next to ‘PFD DSPL’.

2. Turn the

small FMS

knob to display the selec-

tion window. Turn the

FMS

knob to select

‘MANUAL’, then press the

ENT

key.

3. With the intensity value now highlighted,

turn the

small FMS

knob to select the desired

backlighting, then press the

ENT

key.

Turn the large FMS knob to highlight ‘AUTO’ next

to ‘MFD DSPL’, and repeat steps 2 and 3. Press

the

CLR

key to remove the window.

To manually adjust the backlighting for the

PFD and MFD keys:

Turn the avionics knob (for location refer to the

Aircraft Flight Manual).

1. Press the

key on the PFD to display

the PFD Setup Menu Window. ‘AUTO’ is now

highlighted next to ‘PFD DSPL’.

2. Turn the

large FMS

knob to highlight ‘PFD

DSPL’. Turn the

small FMS

knob in the direction

of the green arrowhead to display ‘PFD KEY’.

3. Turn the

large FMS

knob to highlight ‘AUTO’.

Turn the

small FMS

knob to display the selec-

tion window. Turn the

FMS

knob to select

‘MANUAL’, then press the

ENT

key.

4. With the intensity value now highlighted,

turn the

small FMS

knob to select the desired

backlighting, then press the

ENT

key.

5. Turn the

large FMS

knob to highlight ‘MFD

DSPL’ and turn the

small FMS

knob in the direc-

tion of the green arrowhead to display ‘MFD

KEY’. Repeat steps 3 and 4. Press the

CLR

key to remove the window.

Figure 2-3 PFD Setup Menu Window

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 363 364

Commentaires sur ces manuels

Pas de commentaire

Garmin Legacy Software Versions Guide de l'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Navigateurs Garmin Legacy Software Versions