Garmin Software Version 0670.12 Guide de l'utilisateur Page 117

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 152
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 116
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
190-00963-03 Rev. A 99
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
MFD & PFD MESSAGE ADVISORIES
Message Comments
DATA LOST
– Pilot stored data was
lost. Recheck settings.
The pilot profile data was lost. System reverts to
default pilot profile and settings. The pilot may
reconfigure the MFD & PFD with preferred settings,
if desired.
XTALK ERROR
A flight display
crosstalk error has occurred.
The MFD and PFD are not communicating with
each other. The system should be serviced.
PFD1 SERVICE
– PFD1 needs
service. Return unit for repair.
The PFD and/or MFD self-test has detected a
problem. The system should be serviced.
MFD1 SERVICE
– MFD1 needs
service. Return unit for repair.
MANIFEST
– PFD1 software
mismatch, communication halted.
The PFD and/or MFD has incorrect software
installed. The system should be serviced.
MANIFEST
– MFD1 software
mismatch, communication halted.
PFD1 CONFIG
– PFD1 config error.
Config service req’d.
The PFD configuration settings do not match
backup configuration memory. The system should
be serviced.
MFD1 CONFIG
– MFD1 config error.
Config service req’d.
The MFD configuration settings do not match
backup configuration memory. The system should
be serviced.
SW MISMATCH
– GDU software
version mismatch. Xtalk is off.
The MFD and PFD have different software versions
installed. The system should be serviced.
PFD1 COOLING
– PFD1 has poor
cooling. Reducing power usage.
The PFD and/or MFD is overheating and is reducing
power consumption by dimming the display. If
problem persists, the system should be serviced.
MFD1 COOLING
– MFD1 has poor
cooling. Reducing power usage.
PFD1 KEYSTK
– PFD1 [key name]
Key is stuck.
A key is stuck on the PFD and/or MFD bezel.
Attempt to free the stuck key by pressing it
several times. The system should be serviced if the
problem persists.
MFD1 KEYSTK
– MFD [key name]
Key is stuck.
CNFG MODULE
– PFD1
configuration module is inoperative.
The PFD1 configuration module backup memory
has failed. The system should be serviced.
Vue de la page 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 151 152

Commentaires sur ces manuels

Pas de commentaire