
Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
190-00963-03 Rev. A 61
Hazard Avoidance
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
5)
Press the FMS Knob to place the cursor in the ‘TITL’ field
6)
Adjust the antenna tilt angle by turning the small FMS Knob to position the
ground returns as desired.
7)
Press the FMS Knob to remove
Sector Scan
1)
While in the Horizontal Scan Mode, move the Joystick right or left to place
the Bearing Line in the desired position. The location of the Bearing Line
will become the center point of the Sector Scan.
2)
Press the FMS Knob to display the cursor.
3)
Turn the large FMS Knob to place the cursor in the SECTOR SCAN field.
4)
Turn the small FMS Knob to select FULL, 60˚, 40˚, or 20˚ scan.
5)
If desired, readjust the Bearing Line with the Joystick to change the center
of the Sector Scan.
6)
Press the FMS Knob to remove the cursor.
Antenna Stabilization
1)
To activate or deactivate the antenna stabilization, press the MODE
Softkey.
2)
Press the STAB ON Softkey to activate antenna stabilization or press the
STAB OFF Softkey to deactivate. The current stabilization condition is
shown in the upper right of the weather radar display.
Weather Attenuated Color Highlight (WATCH
®
)
To activate or deactivate the WATCH
®
feature, press the WATCH Softkey. This
feature is only available in the Horizontal Scan Mode.
Weather Alert
To activate or deactivate Weather Alert, press the WX ALRT Softkey. Activating and
deactivating will also enable or inhibit the alert on the PFD.
Automatic Standby
When the weather radar system is in the Weather or Ground Map Mode, upon
landing the system will automatically switch to Standby Mode.
Commentaires sur ces manuels