
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
4
SECTION 1 – INTRODUCTION
Press the FMS/CSRS to activate the cursor and turn
the large FMS knob to scroll through the list.
• (14) MENU Key – Displays a context-sensitive
list of options. This options list allows the user to
access additional features or make settings changes
that relate to certain pages.
• (15) PROC Key – Selects approaches, departures
and arrivals from the flight plan. When using a
flight plan, available procedures for departure and/
or arrival airport are automatically suggested. If a
flight plan is not used, the desired airport, and the
desired procedure may be selected. The procedures
key selects IFR departure procedures (DPs), arrival
procedures (STARs) and approaches (IAPs) from
the database and loads them into the active flight
plan.
• (16) ENT Key – Accepts a menu selection or data
entry. The enter key is used to approve an operation
or complete data entry. It is also used to confirm
selections and information entries.
• (17) Altitude Reference Control – Sets the refer-
ence altitude in the window over the altimeter tape.
The large ALT knob selects thousands, the small
ALT knob selects hundreds.
1.2 SECURE DIGITAL CARDS
The GDU 1040 data card slots use Secure Digital (SD)
cards. SD cards are used for aviation database updates
and terrain database storage.
To install an SD card:
1. Press the card into place until it seats on the
internal connector and the front of the card is
flush with the face of the display bezel
To remove an SD card:
1. Gently press on the card to release the spring
latch and partially eject the card.
NOTE: Appendix A of the G1000 Pilot’s Guide
contains instructions on updating the aviation
database.
1.3 SYSTEM POWER-UP
The G1000 system is integrated with the aircraft elec-
trical system and receives power directly from electrical
busses. See the Aircraft Flight Manual Supplement for
system start-up procedures.
Garmin G1000 PFD/MFD and supporting sub-sys-
tems include both power-on and continuous built-in test
features that exercise the processor, RAM, ROM, external
inputs and outputs to provide safe operation.
Commentaires sur ces manuels