
Garmin G1000 Cockpit Reference Guide for Mooney M20M & M20R
71
SECTION 4 – MFD
Direct to Navigation Operations
Selecting a Direct-to Waypoint
In addition to selecting a Direct-to waypoint using an
identifier, a Direct-to waypoint can be selected in the fol
-
lowing ways:
• by facility or city name
• from the active flight plan
• from the nearest airports list
• from a waypoint field, waypoint page, or map
highlight shortcut
Selecting a Direct-to Destination by Facility or City
Name
In addition to selecting a destination by identifier, the
Direct-to Page also allows the selection of airports, VORs
and NDBs by facility or city name. If duplicate entries
exist for the entered facility or city name, additional en-
tries can be viewed by continuing to turn the small FMS
knob during the selection process.
To select a direct-to destination by facility
name or city:
1. Press the
Direct-to
key. The Direct-to Page is
displayed with the waypoint identifier field
highlighted.
2. Turn the
large FMS
knob to highlight the facility
or city name field.
3. Turn the
small and large FMS
knob to enter
the facility or city location of the desired way-
point.
NOTE: the G1000s Spell N Find feature selects
the first entry in the database based on the char-
acters that have been entered to that point.
4. Continue turning the
small FMS
knob to scroll
through any additional database listings for
the selected facility name or city. The
small
FMS
knob can be used to scroll backwards if
the desired waypoint was passed up.
5. Press the
ENT
key to confirm the selected way-
point, and
ENT
again to activate a Direct-to.
Selecting a Direct-to Destination from the Active
Flight Plan
Any waypoint contained in the flight plan may be se
-
lected as a direct-to destination from the Direct-to Way
-
point Page when navigating an active flight plan.
Figure 4-19 Flight Plan Waypoint Direct-to
Commentaires sur ces manuels